Truckable Steel Tug, perfect for small jobs in harbors and lakes.
Engine 6/71 Detroit Diesel, 200 hp
Overall length: 42 feet
Beam: 12.5 feet
Fuel capacity: 300 gallons
Fuel consumption: 3 gallons per hour cruising / 8 gallons per hours at full throttle
Draft: 4 feet
Perfect for local barges/ towing of floats to islands
Steel and Aluminum Welding Service by WABO welders
Dive / Salvage Services
Mooring Buoys, Boat lifts, Float Sales and Installations
Towing, Barge Assist, Ship Assist, Rescue
Licensed and bonded for duty in western rivers and coastal waters














Peacemaker: landing craft
Engines Twin Honda 130 hp
Overall length: 27 feet, 6 foot gate
Beam: 12. feet
Fuel capacity: 130 gallons
Fuel consumption: Depends on application and load
Draft: 0 - 8 inches
Perfect for low water access or landings on remote sites
Steel and Aluminum Welding Service by WABO welders
Dive / Salvage Services
Mooring Buoys, Boat lifts, Float Sales and Installations
Small cargo delivery ( mini crawlers, small cars, compressors), crew transport and light towing
Licensed and bonded for duty in western rivers and coastal waters
Diesel Pusher for Rosie the Riverter:
This diesel pusher unit is designed to be mated to Rosie the Riveter or other barges or act as its own small barge.
16 foot wide x 14 foot long x 4 feet deep pusher unit. Trucks at 15.5 high with tower laid down
Engine: 120 Ford Lehman Diesel, 19 inch single screw
Tower has nav lights, work lights and antenna
Three D 8 batteries and 40 gallons fuel
Weight is approximentaly: 13K and is comprised of 3 sections
This vessel is good for harbors, rivers and protected ocean areas.
This barge can be easly trucked by hydraulic boat transport or boat trailer. Reduces crane charges.
This option can be had where the public boat ramp is concrete.
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Rosie the Riveter: ATB Spud Barge
Overall length: 40 feet. raked on bow
Beam: 20.6 feet
Barge section heights: 4 feet
Spuds are 10 inch pipe x 40 feet
Rear jib crane with 6.25 ton winch
Two sections ( 10 x 40 x 4 ) at 22000 lbs per section
Diesel pusher unit can be mated to barge or act as its own small barge
16 foot wide x 15 foot long x 4 feet deep pusher unit. Trucks at 15.5 high with tower laid down
Engine: 120 Ford Lehman Diesel, 19 inch single screw
Tower has nav lights, work lights and antenna
Three D 8 batteries and 40 gallons fuel
Weight is approximentaly: 10K
This vessel is good for harbors, rivers and protected ocean areas.
This barge can be easly trucked by hydraulic boat transport. Reduces crane charges.
This option can be had where the public boat ramp is concrete.
_____________________________________________________________________________________
Welcome to Diller Construction, located in Whatcom County, WA. We build docks and much more! 360 927 5070 info@dillercorp.com
|